Solar Mini USB Nokia Sony Ericsson Charger Pink
·Highly versatile with as many as 4 different connectors/tips, compatible with most cell phones, PSPs, MP3/MP4s, PDAs, digital cameras, electronic dictionaries, IPAQs!
·Compatibility list: Connector/Tip 1: 2 mm round pin, suitable for Nokia phones Connector/Tip 2: 3.5 mm round pin, suitable for NK02 Nokia phones Connector/Tip 3: Wide connector, suitable for Sony Ericsson phones Connector/Tip 4: Mini USB, suitable for HTC phones, Blackberries and Motorola phones Female USB cable: suitable for all devices that can be charged from USB ports
·Package Included: Solar Panel x 1 AC Adapter x 1 Mini USB to Female USB Cable x 1 Mini USB Output Cable x 1 USB Output Cable x 1 Connectors x 4
·Usage: 1. Pre-charging the solar charger: a, Place the solar panel under direct sunlight, the charger will transfer sunlight into electric power (10-15 hours) b, or, pre-charge the solar charger with AC adapter. (3-5 hours) c, or, pre-charge the solar charger from USB ports. 2. Charging cell phones and other digital devices with the solar charger: a, Slide the power switch to “off”. b, Select from the four connectors the right connector/tip c, Fit the connector onto the correct end of Mini-USB output cable, Insert the other end of the extended cable into the “in/out” jack of the solar charger. d, Check all the connections and slide the power switch to “on”. e, or, for devices charged from USB ports, pick out the USB female cable for connection.
·Simply slide the switch on the right side of the solar panel to turn on/off the solar charger
·Slide the switch on the left side to change output voltage
·Notice: 1. For the first two times users are advised to charge the solar charger with AC110V-240V power for 15 hours to fully activate the battery 2. For safety’s sake, please do NOT use OTHER AC adapters 3. If short-circuit protection is activated, disconnect and the charging process will be restored in 10 minutes.
CHECK PRICE NOW!
Read Full Review >>
GudCraft WG400 400 Watt 12-Volt 6-Blade Wind Generator With Charge Controller
WG400 GudCraft 400W Wind Generator is a low wind speed, small-size wind generator with starting speed just 5mph or more.
CHECK PRICE NOW!
Read Full Review >>
Sunforce 81095 Solar Shed Light
The Sunforce Solar Shed Light adds light to any outdoor space using the power of the sun. Ideal for sheds, gazebos, barns, garages, greenhouses, and much more! No wiring required! This is completely maintenance free and easy to install. Mounting kit includes screws and adhesive tape. The solar shed light is small and compact. The 81096 has a weather resistant design and the amorphous solar panels works in all daylight conditions – even on cloudy days! Comes equipped with an 8 Watt fluorescent light (run time 2 hours), and a 3.6V Ni-Cad AA 600 mAh rechargeable battery. Swivel mounting amorphous solar panel and 12 feet of wire included.
About Amorphous Solar Technology
Amorphous solar panels work in all daylight conditions, even on cloudy days. Best for smaller output needs, temporary set ups, and areas that do not receive predictable sun conditions, the amorphous solar panels guarantee that your solar lights will work anywhere.
CHECK PRICE NOW!
Read Full Review >>
Universal Solar USB Phone Charger Adapter Cable
·Highly versatile with as many as 5 different connectors/tips, compatible with most cell phones, PSPs, MP3/MP4s, PDAs, digital cameras, electronic dictionaries, IPAQs!
·Package Included: Solar Panel x 1 AC Adapter x 1 Mini USB Output Cable x 1 Mini USB to Female USB Cable x 1 Mini USB to USB Cable x 1 Connectors x 4
·Usage: 1. Pre-charging the solar charger: a, Place the solar panel under direct sunlight, the charger will transfer sunlight into electric power and store it in the Lithium battery. It takes 10-15 hours depending on the intensity of sunlight; b, pre-charge the solar charger with AC adapter that comes with the kit. It takes 3-5 hours for the battery to be fully charged this way. c, pre-charge the solar charger from USB ports. 2. Charging cell phones and other digital devices with the solar charger: a, Put the in/out switch in neutral. Select from the five connectors the right connector/tip that goes with your cell phone or other digital devices. Fit the connector onto the correct end of Mini-USB output cable (the one with the hole), and then insert the Mini-USB tip into the “in/out” jack of the solar charger. Then slide the voltage switch to choose output voltage. Finally, check all the connections and slide the in/out switch to “out”. b, or, for devices charged from USB ports, pick out the Mini-USB to female USB cable for connection. c, or, for devices with USB jacks, pick out the Mini-USB to USB cable for connection.
·Simply slide the in/out switch on the top for pre-charging the charger and charging other devices with the charger
·Slide the voltage switch on the top side to change output voltage
·Notice: 1. For the first two times users are advised to charge the solar charger with AC110V-240V power for 15 hours to fully activate the battery 2. For safety’s sake, please do NOT use OTHER AC adapters 3. If short-circuit protection is activated, disconnect and the charging process will be restored in 10 minutes.
CHECK PRICE NOW!
Read Full Review >>
The Best Mini 3.5 Channels Gyro Metal RC Helicopter – Free USB & AC Charger – Value of $14 -
Full Function 3.5 Channels Remote Controlled with Gyro.Intelligent RC System .Up, Down, Left, Right , Forward, Backward, Low Speed & High Speed.Ready-To-Fly straight out of the box. With Flashing lights during flight.360 degree exact directional .Altitude & Rotor Speed Control .Precise controlling and hovering.3.7V Li-Poly 140mAh .Rechargeable Battery. Real Helicopter Performance .Flight Stabilizing System with adjustable trimming control .Charging time: 40 minutes from Remote Controller or USB Cable. 30 minutes if charged from AC Charger.Approximately 8-15 minutes flight time (depends on how you fly).Flight Range Approx. 30 ft . **** FREQUENCIES & COLORS MAY VARY **** Caution: – This 3.5 CH Gyro Metal RC Helicopter is NOT a toy.- Do not fly under direct sunshine or strong wind.- Do not allow children under age 14 playing with this Gyro RC Helicopter without Adults supervisions.- For your safety, please read instructions carefully and thoroughly before playing this Metal RC Helicopter.
CHECK PRICE NOW!
Read Full Review >>
Solar Cell Phone Charger Converter Adapter Blue
·Highly versatile with as many as 4 different connectors/tips, compatible with most cell phones, PSPs, MP3/MP4s, PDAs, digital cameras, electronic dictionaries, IPAQs
·Specification: Input: AC100V-240V Output: 5.5V 800mA Li-polymer Battery: 2600 mAh
·Compatibility list: Connector/Tip 1: 2 mm round pin, suitable for Nokia phones Connector/Tip 2: 3.5 mm round pin, suitable for NK02 Nokia phones Connector/Tip 3: Wide connector, suitable for Sony Ericsson phones Connector/Tip 4: Mini USB, suitable for HTC phones, Blackberries and Motorola phones
·Package Included: Solar Panel x 1 AC Adapter x 1 USB Output Cable x 1 Connectors x 4
·Usage: 1. Pre-charging the solar charger: a, Place the solar panel under direct sunlight, the charger will transfer sunlight into electric power. It takes an approximate 10-15 hours for the battery to be fully charged depending on the intensity of sunlight; b, or, pre-charge the solar charger with AC adapter that comes with the kit. It takes an approximate 3-5 hours for the battery to be fully charged this way. The green LED on the AC adapter will go off when the battery is fully charged; c, or, pre-charge the solar charger from USB ports. 2. Charging cell phones and other digital devices with the solar charger: (1) Select from the four connectors the right connector/tip that goes with your cell phone or other digital devices. (2) Fit the connector onto the correct end of USB output cable (the one with the hole) (3) Insert the other end of the USB output cable (the one with USB tip) into the “out” jack of the solar charger
·Notice: 1. For the first two times users are advised to charge the solar charger with AC110V-240V power for 15 hours straight to fully activate the capacity of the battery 2. For safety’s sake, please do NOT use OTHER AC adapters 3. If short-circuit protection is activated, disconnect and the charging process will be restored in 10 minutes.
CHECK PRICE NOW!
Read Full Review >>
250 Watt Wind Turbine Windmill Generator Kit
This is a 10-blade, 250 watt low speed wind turbine generator built entirely within the USA. Output is computed using open voltage times direct short amps measured at the turbine in perfect test conditions. It was designed to produce a maximum of 30 vdc and 8.5 amps in perfect test conditions. You may or may not ever see this output in the real world due to variations in installations, winds and many other factors that affect turbine output. This turbine normally starts turning in 8-10 mph winds after it has been run-in. It may require a bit more wind when it is first installed.
Since this is a low speed turbine I do not reccomend running it in winds much over 25 mph. Excessive wind can damage the generator.
CHECK PRICE NOW!
Read Full Review >>